Descriere
Description
Printing in PETG provides a sweet spot between PLA and ABS! PETG provides better strength and heat resistance than PLA while being less toxic and easier to print than ABS.
Specifications
Brand: Creality
Model: CR-PETG
Filament Diameter: 1.75mm
Spool Outer Diameter: 20cm
Spool Inner Diameter: 5.5cm
Spool Height: 6.5cm
Spool Outer Diameter: 20cm
Spool Inner Diameter: 5.5cm
Spool Height: 6.5cm
Tensile Strength: 49MPa
Net Weight: 1kg
Gross Weight: 1.29kg
Recommended Printing Settings for CR-PETG:
For optimal performance, set the following settings in your slicing software before printing.
For Bowden Extruder Printers (eg. Stock Ender 3/Pro/V2)
| Nozzle Temperature | 240±5 C |
| Bed Temperature | 90±5 C |
| Part Cooling Fan State | ON |
| Retraction Speed | 60mm/s |
| Retraction Distance | 8mm |
| Print Speed | 40-50mm/s |
| Travel Speed | 60mm/s |
For Direct Drive Extruder Printers
| Nozzle Temperature | 240±5 C |
| Bed Temperature | 90±5 C |
| Part Cooling Fan State | ON |
| Retraction Speed | 60mm/s |
| Retraction Distance | 6mm |
| Print Speed | 40-50mm/s |
| Travel Speed | 60mm/s |
Recenzii
Nu există recenzii până acum.